A few years ago , three to be precise, I took a workshop with renowned Canadian collector David Easterbrook at the PNBCA convention in Vancouver, BC. He was working with some American Larch (larix larcinia) that he had collected in the wilds of Canada and I took the opportunity to acquire one of these special trees. Trees for the workshop were selected by way of raffle and as anyone who knows me knows I don’t generally do so well. [my wife on the other hand does great, go figure]
The tree I landed on wasn’t the largest trunked of the bunch and was more literati in its configuration. It seemed it was going to be a challenge to work with in creating a decent design, in other words it was right up my alley. For a moment I was a little concerned until I realized what was there. As the workshop began David walked around helping people to find the tree in the material, but I knew right away what I wanted to do. By the time he got to me I was well prepared to show him what I had found and after looking over the tree and turning it and looking from many angles David concluded I had indeed found the best image for the tree.
I didn’t work on the tree too much in the workshop. I had found its image and I was happy. I did perform a major bend using the bright orange bailing twine that is so iconic of work at Elandan. In the picture below you can see me and David discussing the bend I was going to perform, to tell the truth I don’t think he thought I could do it. The branch needed to be bent severely to bring the foliage at the end around to the front of the tree. While wrapping the tree and applying that large gauge wire required for the bend I continued to listen to David giving advice to the other workshop members. This advice turned out to be great and was well worth the workshop alone.
Larch at PNBCA workshop before any work began. photo by John Conn
I’ve taken my time with the larch and enjoyed keeping it healthy and lush. As we know from the seven stages of bonsai it is extremely important to work on healthy trees to get the most out of them each year. The first year with this tree was spent letting it grow strongly to set the few major movements that I added and to heal the large bend I made in the side branch. Being larch is extremely flexible and with the tree growing well that year it healed and had set by the next spring. It was then moved and potted into the pot you see it in the below pictures. After collecting the tree David had placed it in a large tub with pumice surrounding the original soil. Having let the tree grow strong for an additional year before potting it allowed me to remove almost all the original soil. It was potted into this pot not for show but as a suitable solution for the time being as it was the best size to allow the tree to grow freely for an additional year. The tree was potted into free draining bonsai soil and watered and fed well to encourage more growth. No additional design work was performed. The tree grew marvelously and has filled the pot with roots. Last fall some carving work was done on the large deadwood section at the base (you can see it under David’s elbow in the above picture) more detailed work will continue.
A few days ago, as spring was getting all sprung, this guy started to leaf out. It comes out a little later than its Asian counter parts but that blue green foliage is so very much worth the wait. I took the next step in wiring this tree and placed some more of the large foliage areas while reducing some of the unneeded extensions as well. I’ve been back and forth on which side I like the best, but for now this is the front. I will be removing the left section of the tree sometime this year, it however is currently being left on to encourage a little more strength in the tree. This winter will see the fine wiring and next step to that final refined image.
Larch after three years of patient slow work. Left side will probably be removed.
As always comments, questions and discussion are always welcome and encouraged.
I adore Larches… the first time I found out a conifer could blow it’s needles and enjoy a winter silhouette I was hooked. Then I saw the Nick Lenz Larches at the Pacific Rim… one of which ranks as one of my favorite bonsai of all time. There’s something so perfect in being able to appreciate the chartreuse glow of new foliage on a early spring evening that I find captivating.
Eastern American Larch by Nick Lenz on display at the Pacific Rim Bonsai Collection
So needless to say we have a few in our collection, and one that I’ve always enjoyed having was one I picked up a few years ago. It was started from seed to be bonsai, and was originally a workshop tree that apparently Daniel had helped style initially… then much later it came to me in 2009. I liked it because the lines reminded me vaguely of the Lenz Larch at the Rim.
Japanese Larch in 2010.
I ended up working on this larch the same day Eric was working on his new larch shown in the post before this one. I was enjoying the April sunshine watching Eric work, and I kept looking at this larch. I had some heavy copper wire that had to come off of it that had been there since we got it. It had been loosely applied, but it was now time to come off. I actually had to buy a pair of mini-bolt cutters to get it off, since traditional wire cutters just weren’t going to cut it. After I got it off, I had an opportunity to evaluate the tree in a whole new way, because I could move major branches. I looked at Eric and told him not to get any ideas about it, because I saw what I wanted to do with it. He suggested I just get on with it… and so I did.
So three years of development and a half dozen guy wires later, and we have this……
Needless to say I am deeply delighted with how it looks, and when I dug up that older photo, I was surprised at how much it had developed in that time. We’re so close to our trees sometimes, it’s hard to really grasp how much they change under our care in so short a time.
I hope you enjoy it as much as I do… and the moral of the story is, in whatever way you can… photograph your trees even if you don’t think they look like much, you’ll be glad you did later.
As you might remember from Arrival of a Larix we received this larch some time ago. I finally decided to set out to work on it this Saturday as it was a nice day out and this guy was just looking like he needed some attention.
A quick review of how the tree looked before work began.
The first order of business was to begin working on the deadwood that is on the tree. The current state of the deadwood was a little spiky and out of place. I began by reducing the height of the main deadwood section. As I began sculpting the deadwood I discovered that parts of it had become punky and moisture was beginning to eat away at the base. This is of course a major concern when there is deadwood that reaches to the soil surface. The punky wood was removed using the die grinder and the rest of the initial carving was completed. The wood will be preserved using lime sulfur that has been diluted and had ink added to it in an effort to reduce any stark contrast in color.
After the initial carving was complete I was able to begin working on changing the structure of the tree. As you can see in the above image the initial image was that of a young tree with strong apical growth and the foliage pads were very linear and flat. These were two of the most important aspects that needed changing to help portray the look of an ancient conifer. The good news is that larches in particular are very flexible and forgiving offering the artist a great deal of latitude in the placement of the branches.
The tree was heavily thinned and compacted to help create a tighter more masculine image and to evoke more of the alpine shape that would be natural to this tree in many surroundings.
The image after styling. A different front was found that showed off the deadwood better and provided a much more interesting focal point.
With the initial styling complete the tree will be allowed to recover. The next steps are to create more definition and interest in the deadwood as well as to create more ramification in the branches. Refinement of the overall image will take probably the next 2 to 3 years.
We thought it might be fun to show some of the trees that Daniel has been working on. He began working on this tree the other day and wanted to share it with everyone. Thuja Occidentalis (Eastern White Cedar) is a tree that doesn’t get too much play as a bonsai specimen however it has wonderful character and excellent foliage that lend themselves to bonsai culture.
Here you can see the tree before Daniel started to work on it. It had gotten a little hairy in the last few years and was ripe for an evening of work and transformation.
Before work began on the tree (picture provided by diane Robinson)
Working on the tree in the evenings as Daniel often does he completed work on the tree in a few nights. It is important to note the amount of foliage that was removed as the tree is rather vigorous and controlling the planes of the foliage is very important. Also as the trunk of the tree is the main focal point here with its gnarled undulating deadwood the foliage needs to be subordinate to the trunk to carry out the intended image.
The tree after a few evenings of work. Notice how the foliage is subordinate to the trunk (focal point).
Some shots of the beautiful deadwood that is carefully sculpted and exposed. These are the parts of the tree that give it its feel of truly ancient age.
In the above photo you can see the heal marks that created callous and how how that has receded with the death of those areas. This is something we see often on very ancient trees, the receding of the live vein as it ages.
Here you can see the sculpted ancient hollows that show the skeleton of the tree.
We certainly hope you all enjoyed seeing the changes to the tree. Daniel always loves to share his work with others and inspire bonsai people to spend time working on their trees.